AGP Picks
View all

MESSCAN launches compact TC25 laser distance sensor for OEM builds

Nov. 17, 2026
MESSCAN launches compact TC25 laser distance sensor for OEM builds
By AI, Created 07:48 UTC, Nov 17, 2026, AGP -

MESSCAN has introduced the TC25, a compact laser distance sensor for OEM and ODM integration in optical and electro-optical equipment. The 47 × 25 mm module pairs a 3 to 1,200 m range with UART output, aiming at handheld instruments, gimbals, UAVs and industrial sensing systems.

Why it matters: - The TC25 gives equipment makers a small laser distance module they can embed without redesigning the host system around the sensor. - Its 15 g weight and 47 × 25 mm size target space-constrained products such as handheld optics, gimbals and portable instruments. - The 905 nm Class 1 emitter is designed for outdoor and field-deployed equipment where eye-safe operation matters.

What happened: - MESSCAN introduced the TC25 laser distance sensor for evaluation and OEM integration projects. - The module is available through the company’s product page at the company’s website. - MESSCAN positions the TC25 for equipment manufacturers building optical instruments and customized electronic systems.

The details: - The TC25 measures 47 × 25 mm and weighs approximately 15 g. - The cylindrical housing is designed for installations where available space and component weight are tight constraints. - The sensor uses 905 nm Class 1 laser technology. - At 70 percent target reflectivity, the module measures from 3 to 1,200 m. - Accuracy is ±1 m below 200 m and 0.5 percent above 200 m. - Resolution is 0.1 m. - Maximum single measurement time is approximately 1 second. - The near-infrared beam is invisible during normal use. - The Class 1 rating indicates eye-safe operation under normal conditions and no additional protective measures for the integrator. - The TC25 supports UART communication with a default baud rate of 115200 bps. - Its TTL 3.3 V serial interface is compatible with TTL 5 V. - Operating voltage ranges from 3.3 to 5 V DC. - Communication parameters, including baud rate and module identification, can be configured through commands rather than hardware changes. - Multiple units can be addressed on a shared bus, allowing a single host controller to manage several laser distance sensor nodes. - Operating temperature ranges from −20°C to +50°C.

Between the lines: - The combination of long range, compact size and simple serial integration points to OEM customers that want a ready-to-embed ranging core rather than a finished consumer product. - The 3.3 to 5 V supply window and UART interface reduce integration friction for battery-powered and logic-level mixed systems. - MESSCAN is also using the launch to signal broader OEM and ODM support, including custom dimensions, connectors, interfaces and power specifications. - The company recommends application-specific testing before volume integration because actual performance depends on target reflectivity, target size, ambient light and environmental conditions.

What’s next: - MESSCAN said technical feasibility for OEM and ODM projects will be evaluated case by case. - Customization work is quoted after requirement review. - Equipment manufacturers can use the TC25 for evaluation in handheld rangefinders, binoculars, gimbal and UAV altitude reference, perimeter detection and industrial automation systems. - MESSCAN says it supports product selection, technical documentation and customization projects for integrators worldwide.

The bottom line: - The TC25 is MESSCAN’s compact answer for makers that need eye-safe, long-range distance sensing in a small, serial-connected module.

Disclaimer: This article was produced by AGP Wire with the assistance of artificial intelligence based on original source content and has been refined to improve clarity, structure, and readability. This content is provided on an “as is” basis. While care has been taken in its preparation, it may contain inaccuracies or omissions, and readers should consult the original source and independently verify key information where appropriate. This content is for informational purposes only and does not constitute legal, financial, investment, or other professional advice.

Sign up for:

Consumer Goods Press Releases

The daily local news briefing you can trust. Every day. Subscribe now.

By signing up, you agree to our Terms & Conditions.

Share this page:

Advanced Search Options

Search for:

Search scope:

Type:

Search in:

Date range:

The last

Sort by:

Sign up for:

Consumer Goods Press Releases

The daily local news briefing you can trust. Every day. Subscribe now.

By signing up, you agree to our Terms & Conditions.